Medical Equipment YB11C2-1A-Q(R5) EMI Filter High Efficiency
IEC Inlet Power Line Filter
Three In One IEC Inlet Emi Filter:
3-in-1 IEC inlet EMI filter is a passive electronic component that
combines three functions into a single unit: the IEC power input
module, fuse and jack. It is designed to be mounted on socket devices and is usually used
in electronic devices that require a power input.
Feature Of IEC Inlet Emi Filter:
1. IEC inlet: An IEC inlet is a standard connection for a
power cord that allows electronic equipment to be plugged into a
wall outlet or other power source.
2. Low insertion loss :IEC imported EMI filter will cause a certain
signal power loss, known as insertion loss, our insertion loss is
controlled between 30-90dB
3. (R5) types comply with the requirements of IEC/EN60601-1 for safety
clearance, leakage current.
Typical Application:
--Medical equipment
--Portable electrical and electronic equipment
--Small and medium-sized machines and household equipment
--Single-phase power supply,switch-mode power supply
| Item | Medical IEC Inlet Filter |
| Model | IEC Inlet Emi Filter YB11C2-10A-Q |
| Transfer Function | Low Pass |
| Package Type | Surface Mount |
| Nominal Center Frequency | 10K-30MHZ |
| Insertion Loss | 60~90dB |
| Input Impedance | 50Ω |
| Rated Voltage | 115V/250V |
| Rated Current | 1~10A |
| Environmental Temperature | 40°C |
| Temperature Range | 25 / 085 / 21 |
| Operating Frequency | 50/60HZ |
| Line to Line | 1450VDC |
| Line to Ground | 2250VDC |
| Maximum Leakage Current | 250VAC/60HZ 0.8mA Max |
| MOQ | 100pcs |
| Price | USD1.5~8.8/Meter |
| Lead Time | 5~15 weekday |
Rule of Nomination:
YB------11-------C2--------1A----------Q----------------(R-----------5)
¦
¦
¦ ¦
¦ ¦ ¦ ¦
circuit
case current connection
optional medical type
C1,C3,C5 --- single fuse
C2,C4,C6 --- double fuse
YB11C2-10A-Q Picture Picture:
Tabulates:
| Model No. | Rated Current
@40°C
| Terminal Options
| Bleeder resistor (optional) R(MΩ) | Medical equipment |
G | Leakage current 250V/50Hz | Electrical Schematic
| Rated Voltage(V) | Operating Frequency(Hz) |
|
| | | |
| YB11C2-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - | <5μA | Fig.1 | 115/250V | 50/60Hz |
| YB11C2-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C2-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C2-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C2-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C2-8A-x(R6) | 8A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C2-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.1 |
| Model
No. | Rated Current
@40°C
| Terminal Options
| Bleeder resistor (optional) R(MΩ) | Medical equipment |
G | Leakage current 250V/50Hz | Electrical Schematic
| Rated Voltage(V) | Operating Frequency(Hz) |
| |
| | | |
| YB11C3-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - | <5μA | Fig.1 | 115/250V | 50/60Hz |
| YB11C3-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C3-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C3-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C3-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C3-8A-x(R5) | 8A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C3-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-8A-x(R5) | 8A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C4-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.1 |
| Model
No. | Rated Current
@40°C
| Terminal Options
| Bleeder resistor (optional) R(MΩ) | Medical equipment |
G | Leakage current 250V/50Hz | Electrical Schematic
| Rated Voltage(V) | Operating Frequency(Hz) |
|
|
| | | |
| YB11C5-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - | <5μA | Fig.1 | 115/250V | 50/60Hz |
| YB11C5-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C5-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C5-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C5-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C5-8A-x(R5) | 8A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C5-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-8A-x(R5) | 8A | Q | S | - | 1 | 5 | - | Fig.1 |
| YB11C6-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.1 |
*Q: Fast-on 6.35x0.8mm
S: solder 4.0x0.8mm 
W: UL1015 18awg
Electrical schematic:
Fig.1
Mechanical Dimension(Unit: mm)
C1/C2 CASE
| Case | A | B | C | D | E | F | G | H | I | J | K | L |
|
| C1/C2 | 62 | 61 | 29.5 | 50 | 40 | 65 | 11 | 11 | 17 | 3.5 | 6.3*0.8 | 46.0 |
|
| Tolerances | ±1 | ±1 | ±1 | ±1 | ±0.15 | ±1 | ±0.5 | ±0.5 | ±0.5 | ±1 | ±0.15 | ±0.15 |
|
C3/C4 CASE
| Case | A | B | C | D | E | F | G | H | I | J | K | L |
|
| C3/C4 | 62 | 61 | 29.5 | 80 | 72 | 35 | 11 | 11 | 17 | 3.5 | 6.35*0.8 | 46 |
|
| Tolerances | ±1 | ±1 | ±1 | ±1 | ±0.15 | ±1 | ±0.5 | ±0.5 | ±0.5 | ±1 | ±0.15 | 46 |
|
C5/C6 CASE
| Case | A | B | C | D | E | F | G | H | I | J | K |
|
| C5/C6 | 62 | 61 | 29.5 | 65.5 | | 32 | 11 | 11 | 19 | | 6.35*0.8 |
|
| Tolerances | ±1 | ±1 | ±1 | ±1 | ±0.15 | ±1 | ±0.5 | ±0.5 | ±0.5 | ±1 | ±0.15 |
|
Insertion loss table(In 50ohm system according IEC/CISPR No.17)
Common mode
--------
differential mode
1A
3A
6A
8A
10A
